Photo cut from a video of the printed brochure.
Arc Tooth Belt
Specifications
The brochure prints no specifications for this product.
From the brochure
Every line printed about this product, copied from the brochure page at 00:12:38.8 in the video.
汽车同步带 AUTO TIMING BELTS
产品特点 Product Features
同步带传动是利用带齿与带轮的啮合来传递动力的一种新型的传动。它兼有齿轮传动、链传动和带传动的各自优点。 The transmission of synchronous belt is a new transmission mode and transmits dynamic force by the meshing of the belt teeth and pulley. It combines the advantages of gear transmission, chain transmission and belt transmission.
结构 Structure
| 编号No. | 名称Name | 功能Function | 材料Mate |
|---|---|---|---|
| 1 | 顶胶 Top Rubber | 保护内层抗张体 Protect the tensile member | CR |
| 2 | 抗张体 Tensile Member | 传递动力的核心材料，防止皮带伸长 Protect the tensile member and maintain the shape of the rubber, prevent the rubber from stretching | 玻纤 Glass Fiber |
| 3 | 齿胶 Tooth Rubber | 保护抗张体并保持胶带形状 Protect the tensile member and maintain the shape of the rubber | CR |
| 4 | 齿布 Teeth Fabric | 具有极好的耐磨特性，从而延长使用寿命 Excellent frictional resistance which prolongs the service life of product | 尼龙布 Nylon Fabric |
特征 Feature
- 低噪音运转
- 不需要润滑油
- 防止打滑发生
- 节省燃料，经济性好
- 极高的机械效率
- Low noise operation
- No lubrication needed
- Prevent skidding
- Conservation of fuel and good economy
- Super-high mechanical efficiency
汽车同步带型号与尺寸 Type& Size of Sychronous Belt for Automobile
| 截面 Profile | 尺寸 Diamension | 截面 Profile |
|---|---|---|
| p hs t hl | ||
| MR | 9.525 5.70 2.20 ±0.25 3.40 | Round tooth |
| RU | 9.525 5.41 2.00 ±0.25 3.41 | Round tooth |
| YU | 6.000 5.30 2.25 ±0.25 3.05 | Trap ezoidal tooth |
| ZA | 9.525 4.21 2.30 ±0.25 1.91 | Trap ezoidal tooth |
| ZBS | 9.525 5.06 2.30 ±0.25 2.60 | Trap ezoidal tooth |
| SBM | 8.000 5.30 2.25 ±0.25 2.90 | Trap ezoidal tooth |
| MY | 8.000 5.21 2.15 ±0.25 3.06 | Round tooth |
| ZB | 9.525 4.50 2.21 ±0.25 2.29 | Trap ezoidal tooth |
圆弧齿同步带 Arc Tooth Belt
RPP同步带 RPP Synchronous Belt
同步带性能表 PROPERTY OF SYNCHRONOUS BELT
| 试验项目 TESTITEM | 节距代号 PITCHTYPE |
|---|---|
| 拉伸试验 TENSION TEST | XL L H XH |
| 拉伸强度≥KN/5.4mm TENSION STRENGTH | 1.96 2.65 6.77 9.32 |
| 伸长率≤% ELONGATION | 4.0 4.0 4.0 4.0 |
注：伸长率是下表所示的载荷时伸长率 Note: The elongation is under loaded-up condition's elongation
伸长试验载荷表 LOADING CAPACITY
| 节距型号 PITCH TYPE | XL | L | H | XH |
|---|---|---|---|---|
| 初载KN(25.4mm LOADING | 1.57 | 2.16 | 5.39 | 7.46 |
e of rubber synchronous belt & the dimension of section industrial rubber synchronous belt
| H | XH | XXH | T2.5 | T5 | T10 | T20 | AT5 | AT10 | AT20 |
|---|---|---|---|---|---|---|---|---|---|
| 12.7 | 22.225 | 31.75 | 2.5 | 5 | 10 | 20 | 5 | 10 | 20 |
| 2.29 | 6.35 | 9.53 | 0.7 | 1.2 | 2.5 | 5 | 1.2 | 2.5 | 5 |
| 4.3 | 11.2 | 15.7 | 1.3 | 2.2 | 4.5 | 8 | 2.7 | 5 | 8 |
| 40 | 40 | 40 | 40 | 40 | 40 | 40 | 50 | 50 | 50 |
al rubber synchronous belt
| STPD/STS |
|---|
| S2m S3m S5m S8m S14m |
| 2 |
同步带截面尺寸 Size Of Synchronous Belt For Automobile
1-ZA-19 Belt Width(mm) Tooth Profile Number of Teeth
Source frame
The brochure page this product was read from. The box marks the product.
- Video
- 20261110_170721.mp4
- Time
- 00:12:38.8
- Page
- 20261110_170721-0147a
- Text check
- matches the page
- Second read
- not checked yet